Hull and Deck Paints

CHOOSE YOUR TEAMAC PRODUCT

TEAMAC CHLORVAR CHLORINATED RUBBER PAINT

For the protection of surfaces subject to severe atmospheric pollution or chemical attack. Offers outstanding protection against a wide range of chemicals and aqueous solutions, particularly acids.

Application:                     Can be applied by Brush, Airless Spray, or Roller (To prevent
                                          air entrapment, brush lay off after rolling)
Finish:                              Gloss
Coverage:                       11 Square Metres per Litre
Available Colours:          WHITE, BLUE, BLACK
Available sizes:               5 Litres
Priming:                           Metaclor Underwater Primer
Thinners/Brush Wash:    Teamac Thinners V/607/15
Drying Time:                    Touch dry - 2hrs, Hard dry - 24 hrs, Full hardness - 7-14 days
                                          (at 20c to a dried film thickness of 20-25 microns)

CLICK HERE for Technical and Health & Safety Data Sheets

METALASTIC BLACK BITUMINOUS PAINT

A high quality bituminous paint for marine uses.

Surfaces:                        Metal, Wood, Concrete
Application:                    Paint Brush
Finish:                             Off Gloss
Coverage:                      12 Square Metres per Litre
Available Colours:         BLACK
Available Sizes:             1, 2.5, 5, 25 Litres
Priming:                          Metaclor Underwater Primer
Brush Wash:                   Teamac Thinners V/607/14
Launch Time:                  Recommended within 2 weeks
Drying Time:                   Touch dry - 3 hours; Hard dry - 12 hours (at 20c to 
                                         a dried film thickness of 35-40 microns)

2 PACK POLYURETHANE PAINT

Topcoat A high performance 2 pack top coat for excellent protection and durability. Gives top quality protection of the surface (apply direct to GRP surfaces for a finish). 

Surfaces:                         Metal, Wood, GRP  
Application:                     Paint Brush  
Finish:                              Gloss.  
Coverage:                       10 Square Metres per kilo
Available Colours:          BLUE, GREEN, YELLOW, RED, CREAM  
Available sizes:              1, 5 kilos  
Drying Time:                   Initial cure - 3-4 hrs, Hard dry - 16-24 hrs, Full cure - 5-7 days
                                         (at 20c to a dried film thickness of 65-75 microns)

CLICK HERE for Technical and Health & Safety Data Sheets

TEAMAC BLACK TAR VARNISH

A tar based coating for marine uses

Surfaces:                            Metal, Wood, Concrete   
Application:                        Paint Brush  
Finish:                                 Gloss.  
Coverage:                          12 Square Metres per Litre
Available Colours:             BLACK  
Available sizes:                 5 litres                                
Brush Wash:                      Teamac Thinners V/607/17                    
Drying Time:                      Touch dry - 1-2 hrs, Hard dry - 4 hrs, Full hardness - 3-5 days
                                            (at 20c to a dried film thickness of 50 microns)

CLICK HERE for Technical and Health & Safety Data Sheets

TEAMAC BOOT TOPPING

Used as the interface coating between the waterline and the Deck coatings. Provides a hard surface less receptive to marine growth and polish able to remove grime.

Surfaces:                              Metal, Wood, Glass Fibre   
Application:                          Paint Brush or Roller   
Finish:                                   Gloss.  
Coverage:                            12 Square Metres per Litre
Available Colours:               WHITE, BLUE, BLACK, GREY, GREEN, RED  
Available sizes:                    5, 20 litres  
Priming:                                Metaclor Underwater Primer (wood & steel) Apply direct to GRP.
Thinners/Brush Wash:         Teamac Thinners 14 V/607/14
Drying Time:                         Touch dry - 4 hrs, Hard dry - 12 hrs, Full hardness - 5-7 days
                                               (at 20c to a dried film thickness of 30-35 microns)

TEAMAC DECK PAINT

A conventional, durable protective coating for wood and metal decks.

Surfaces:                              Wood or Metal   
Application:                          Paint Brush or Roller   
Finish:                                   Off Gloss.  
Coverage:                            12 Square Metres per Litre
Available Colours:               GREY, GREEN, RED  
Available sizes:                    5, 20 litres  
Priming:                                Teamac Zinc Phosphate Primer (Metal)
                                               Teamac wood Primer (Wood)
Thinners/Brush Wash:         Teamac Thinners 14 V/607/14                       
Drying Time:                         Touch dry - 5 hrs, Hard dry - 24 hrs, Full hardness 5-7 days
                                               (at 20c to a dried film thickness of 35-40 microns) 

CLICK HERE for Technical and Health & Safety Data Sheets

TEAMAC MARINE GLOSS

A top quality marine coating. Has excellent opacity and high gloss finish. Suitable for all general marine areas, bridge fronts, deck work, masts, superstructure etc. Has excellent adhesion.

Surfaces:                             Metal, Wood, Glass Fibre   
Application:                         Paint Brush or Roller   
Finish:                                  Gloss.  
Coverage:                           12 Square Metres per Litre
Available Colours:              Wide Range  
Available sizes:                  1, 2.5, 5 litres  
Priming:                               Teamac Marine Undercoat
Thinners/Brush Wash:        Teamac Thinners 14 V/607/14
Drying Time:                        Touch dry - 4 hrs, Hard dry 12 hrs, Full hardness - 5-7 days
                                              (at 20c to a dried film thickness of 35-40 microns)

CLICK HERE for Technical and Health & Safety Data Sheets

 

TEAMAC SUREGRIP ANTI-SLIP DECK PAINT

A ready prepared liquid coating containing coarse aggregates. Dries to a hard anti-slip finish.

Surfaces:                       Metal, Wood, Glass Fibre   
Application:                   Paint Brush  
Finish:                            Aggregated.  
Coverage:                     6-10 Square Metres per Litre
Available Colours:        WHITE, BLUE, BLACK, GREY, GREEN, RED, YELLOW  
Available sizes:            1, 2.5, 5 litres 
Priming:                         Teamac Wood Primer (Wood) Teamac Zinc Phosphate
                                       Metal Primer (Ferrous Metals) Teamac Deck Paint (GRP)
Brush Wash:                 Teamac Thinners 14 V/607/14
Drying Time:                 Touch dry - 6 hrs, Hard dry - 24 hrs, Full hardness - 5-7
                                       days (at 20c to a dried film thickness of 60-100 microns)
 

CLICK HERE for Technical and Health & Safety Data Sheets

EXTRA BRILLIANT ALUMINIUM SOLAR REFLECTING PAINT

An extra brilliant silver oil based paint giving a high reflective metallic sheen. Designed to reflect and dissipate heat and sunlight (90C)

Surfaces:                         Metal, Wood, Glass Fibre   
Application:                     Paint Brush or Mohair Roller   
Finish:                              High reflective metallic sheen .  
Coverage:                       4-6 Square Metres per Litre
Available Colours:          SILVER  
Available sizes:              1, 2.5, 5, 20 litres  
Priming:                           N/A
Brush Wash:                   Teamac Thinners 14 V/607/14
Drying Time:                   Touch dry - 3 hrs, Hard dry - 12 hrs, Full hardness - 5-7
                                         days (at 20c to a dried film thickness of 20-25 microns)

CLICK HERE for Technical and Health & Safety Data Sheets